Ocean heat content

menu

Ocean heat content

Ocean heat content tells us how much heat energy there is in the oceans. It is measured by autonomous Argo floats and devices lowered from research vessels and other ships.

Find out more about ocean heat content

Annual global ocean heat content to a depth of 700m expressed as a difference from the 1981-2010 average.

Annual global ocean heat content to a depth of 700m expressed as a difference from the 1981-2010 average.

Annual global ocean heat content to a depth of 700m difference from 1981-2010 average. Four data sets - EN4, Levitus, JMA and Cheng et al. - are shown. They agree on the overall warming of the upper ocean.


Monthly global mean sea-level difference from 1993-2010 average

Monthly global mean sea-level difference from 1993-2010 average

Monthly global mean sea-level from 1993-present expressed as a difference from the average for 1993-2010. A number of satellite-based data sets are shown - CSIRO, AVISO, CMEMS, Colorado University and NASA. They agree closely on year to year variations and the long-term increase.


Annual global mean sea-surface temperature difference from 1981-2010 average.

Annual global mean sea-surface temperature difference from 1981-2010 average.

Annual global mean sea-surface temperature expressed as a difference from the 1981-2010 average. Three different data sets are shown - HadSST4, HadSST3 and ERSSTv5. There is good agreement on the long-term warming of the surface oceans, and on year-to-year variability.

×

Why is ocean heat content important?

90% of the excess energy trapped in the earth system by anthropogenic greenhouse gas emissions goes into the oceans. Ocean heat content is a direct measure of the accumulation of that energy. Unlike surface temperature, which can change a lot from one year to the next because of El Niño and La Niña, ocean heat content rises more steadily.

As the oceans warm, the water in the oceans expands raising sea level. We can calculate how much sea level should rise based on how much the oceans have warmed. The calculated sea-level change can be combined with other sources of sea level rise (like melting glaciers and storage of water on land) and compared to actual measurements of sea-level change.

Changes in the temperature of the oceans can affect how much oxygen and carbon dioxide can dissolve in the seawater, which in turn can change the amounts of these gases in the atmosphere. All else being equal, less gas will dissolve in warmer water.

How has ocean heat content changed?

Overall ocean heat content has increased since the 1950s. The increase has generally been steadier than that of surface temperature. There are slight drops after large volcanic eruptions such as that of Pinatubo in 1991 or El Chichon in 1982.

Although ocean heat content is less sensitive to year to year changes associated with El Niño and La Niña, it does vary a little as El Niño and La Niña affect the flows of energy from the ocean to atmosphere and vice versa.

How is ocean heat content measured?

The world's oceans have a huge volume so even small changes in temperature can correspond to large changes in energy. Therefore, it is important to be able to measure very small changes in temperature in order to get an accurate measure of ocean heat change. In order to measure heat content we have to measure temperatures through the whole volume of the upper oceans, so we need measurements at different depths as well as at different locations.

Several different kinds of instruments have been used to measure temperature “profiles”, which are a series of temperature measurements at different depths. CTD (Conductivity-Temperature-Depth) instruments make very precise measurements of water temperature and depth. They are usually deployed from research vessels, so the number of measurements available is rather small. Since the early 2000s, autonomous robot floats, known as Argo floats, have measured large numbers of profiles in the upper 2000m of the ocean. From the late 1960s, eXpendable BathyThermographs (XBTs) were used. An XBT drops through the water, unspooling a long wire behind it. The XBT measures temperature as it descends and relays that back to the observer via the wire. The depth of the measurement can be calculated from how long the XBT has been falling. XBT measurements are less precise than CTD or Argo measurements and the equations used to work out the depths of the measurements sometimes give inaccurate answers which need to be corrected using the more precise CTD measurements.

Why has ocean heat content changed?

According to the IPCC AR5, “it is very likely that anthropogenic forcings have made a substantial contribution to upper ocean warming (above 700m) observed since the 1970s. This anthropogenic warming has contributed to global sea level rise over this period through thermal expansion.

Find out more?

For a recent comprehensive summary of changes in OHC, see the Bulletin of the American Meteorological Society State of the Climate report.

Further scientific information and references:

Ocean Heat Content

EN.4.2.2.c14

Levitus

EN.4.2.2.c13

EN.4.2.2.g10

EN.4.2.2.l09

IAP

JMA

Sea Level

CSIRO

AVISO

CMEMS

Colorado

NASA

Sea Surface temperature

HadSST4

HadSST3

ERSSTv5

Get the data

Ocean Heat Content

Sea Level

Sea Surface temperature